•
1 4

Rubio Monocoat

FR Oil 2C System

FR Oil 2C System

$340.41
$340.41
Sale Sold out
Shipping calculated at checkout.
Size
Colour

📞 CONTACT US: 0419 714 719

Rubio Monocoat FR Oil System, a fire-retardant system for parquet flooring that combines a pre-treatment with the fire-retardant Rubio Monocoat FR Base and a finish with Rubio Monocoat FR Oil – which is the fire-retardant modified version of Rubio Monocoat Oil Plus 2C.

The system is not film-forming, does not contain any salts and has a limiting effect on smoke development. Thanks to these unique characteristics, Rubio Monocoat FR Oil System is the first flame-retardant oil system in the world that can present a Bfl-s1 certification on oak (5 mm top layer).

Rubio Monocoat FR Oil System obtained a Cfl-s1 certificate with a 2.5 mm oak top layer. Statistics indicate that smoke considerably reduces the ability to rescue people; Rubio has strived to the utmost extent to limit smoke development. The system gets an s1-citation, which attests to a safer product.

Features

  • Available in all standard interior RMC colours. 
  • Optimal performance: low consumption 
  • No build-up of layers, no saturation 
  • Limits smoke development in case of fire 
  • No salts, which increases the fire-retardant effect 
  • Doesn’t contain solvents or water, 0% VOC 
  • Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1

Suitable For

  • Interior Use
  • Wooden Surfaces, i.e., parquet flooring.
  • Walls and Ceilings
  • Manual and Industrial Applications.

Technical Information

  • Physical state at 20 °C: liquid 
  • Colour: clear (for Accelerator)
  • Odour: none (oily for FR Oil)
  • Flash point: > 160 °C (closed cup) 
  • VOC content: 0 g/L
  • Storage: Can be stored in a dry place for up to 36 months.

CONSUMPTION: Conform the norm: 16g/m² ± 2 (= ca. 50 m²/L)

Instructions

Rubio Monocoat FR Base

STEP 1. Sand the surface scratch-free. Finish with screening net 100. 

STEP 2. Vacuum thoroughly and eliminate remains of dust with Cleaner. Wait until the surface is completely dry (check the technical datasheet of Cleaner before use).

STEP 3. Apply FR Base by spraying the product with a pressure pump or back sprayer. Work in zones and level or smooth out with the Microfiber Pad. Avoid puddle formation (this results in shiny spots).

OR Apply Rubio Monocoat FR Base with a brush or roller. Then polish with a polishing machine with a white pad (polishing rag). Handle zones from 5 to 10 m² at a time.

STEP 4. Allow the surface to dry. The drying time is approximately 12 hours at room temperature (depending on ventilation and humidity).

STEP 5. Break the raised wood fibres with a floor polisher equipped with a red Rubio Monocoat Pad and vacuum afterwards.

Rubio Monocoat FR Oil

STEP 6. Take the FR Oil 2C and stir the A component until a homogenous mixture is obtained. Carefully add the B component with a ratio of appr. 3 units A to 1 unit B and mix carefully (1 to 2 minutes).

STEP 7. Work in zones of 5-10 m². Start each zone by treating the borders with a beige or red Rubio Monocoat Scrubby pad. Then apply a small quantity of FR Oil 2C every other 0.5 metres using a brush. Spread out in the direction of the wood using a polishing machine with a beige or red 16 inch Rubio Monocoat pad.

*Spatula method: spread out FR Oil 2C with a stainless spatula in zones which can be finished in maximum 30 minutes (including steps 7 and 8). 

STEP 8. Thoroughly remove all excess oil with a cloth or a polishing machine with a white 16 inch Rubio Monocoat pad.

STEP 9. After having finished all the zones, pass again with a new white Rubio Monocoat pad. Now the surface should feel non-sticky.

STEP 10. You can walk on the floor after about 24 hours (covering the floor should only be done after 5-7 days

Note: Some items may be on backorder. Please call us or send an email to confirm.

View full details